Charge on.
BlinkCharging.com
Page 34 of 56
•
Active Gateway
– Current active gateway IP address. There will be value here only if
connected to a network and network provide this data.
•
Active Primary DNS
– Current active primary DNS IP address. There will be value here only if
connected to a network and network provide this data.
•
Active Secondary DNS
– Current active secondary DNS IP address. There will be value here
only if connected to a network and network provide this data.
Figure 24. Ethernet Settings
Ethernet Settings
•
Link Mode
– Configure the Ethernet port to use DHCP or Static IP. If you select Static IP from the
drop-down menu, you need to enter values for IP Address, Netmask, and Default Gateway fields.
•
IP Address
– The IP address of the EVSE. It’s modifiable if Link Mode is Static IP.
•
Netmask
– The subnet mask. It’s modifiable if Link Mode is Static IP.
•
Default Gateway
– The default gateway. It’s modifiable if Link Mode is Static IP.
•
Primary DNS
– The primary Domain Name Server (optional).
•
Secondary DNS
– The secondary Domain Name Server (optional).
•
Ping URL
– Address of the host that the EVSE will ping for the Ethernet connection (optional).
Figure 25. Wi-Fi Settings
Wi-Fi Settings
•
SSID
– The SSID name of Wi-Fi Access Point. Press Scan button to scan and receive current
detectable Wi-Fi signal.
•
Security
– The encryption of Wi-Fi Access Point. Options are None, WEP, WPA-PSK, WPA2-
PSK, WPA-PSK+WPA2-PSK and Auto.
•
Password
– The password of Wi-Fi Access Point.
•
Wi-Fi MAC Address
– Display Wi-Fi device hardware MAC address.
•
Wi-Fi Signal Strength
– Display the wireless signal strength of Wi-Fi in dBm.