17
• Touch to scroll to option 2 (
Screen Standby
), and then touch .
• Touch to scroll to the desired standby time. Touch to select the desired
option.
• Touch to return to the previous menu.
5.4.7.3 Blend Cycle Pause
The blend cycle pause feature allows you to begin a blend cycle in automatic
mode, pause the cycle (to add more ingredients, for example), and then resume
the cycle at the cycle time and speed the cycle was paused at. For example, if you
begin the Small Milkshake blend cycle and then pause the cycle with 30 seconds
remaining in the cycle, when you resume the cycle, the cycle will restart at 30
seconds remaining and at the corresponding blend speed. If the blend cycle pause
feature is disabled, a blend cycle cannot be paused; the cycle can only be stopped
(by touching ).
To enable or disable the blend cycle pause feature, complete the following steps:
• E
nter programming mode by touching and holding for 3 seconds. The
control surface will display and , and the LED screen will show the main
menu.
• Touch to scroll to menu item 6 (
Settings
), and then touch .
• Touch to scroll to option 3 (
Blend Cycle Pause
), and then touch .
• Touch to toggle between enabling and disabling the blend cycle pause
feature.
• Touch to return to the previous menu.
5.4.7.4 Slider Lockout
The slider lockout feature allows you to disable manual operation (that is, the
slider bar on the control surface). When this feature is enabled, only profiles on
the blender can be used to operate the blender. To enable or disable this feature,
complete the following steps:
• E
nter programming mode by touching and holding for 3 seconds. The
control surface will display and , and the LED screen will show the main
menu.
• Touch to scroll to menu item 6 (
Settings
), and then touch .
• Touch to scroll to option 3 (
Slider Lockout
), and then touch .
• Touch to toggle between enabling and disabling the slider lockout feature.
• Touch to return to the previous menu.
Section 6: Troubleshooting
Refer to the following to troubleshoot problems with your Stealth. If following the
instructions below does not resolve the problem, contact Blendtec customer
service at 1-800-BLENDTEC (US customers) or a Blendtec qualified service agent
(international customers).
