10
5.3 Manual Operation
Touch to switch from automatic operation mode to manual operation mode. In
manual operation mode, the number buttons on the control surface are replaced
with a slider control bar. With the slider control bar, you can achieve the desired
speed simply by touching the bar or moving your finger along the bar (the lowest
speed is the farthest left; the highest speed is the farthest right). The blender will
run for 90 seconds. To pulse while in manual operation mode, touch ; the screen
will display
~Pulse @ Speed 7
. Then, touch and hold to begin pulsing.
5.4 Advanced Programming and Diagnostics
The programming mode can be used to do the following:
• Select a profile
• Change preprogrammed cycle numbers
• Check blend cycle counts
• Check the diagnostic error log
• Use a custom profile designed via the Blend Wizard™ (Blendtec’s online
programming tool)
To enter programming mode, touch and hold for 3 seconds. The scroll arrow
icon and the select icon will appear on the control surface, and the LED
screen will show the main menu. Use and to scroll to and select the desired
function. The options available from the main menu are listed below (numbered as
displayed in the blender):
1. Profile
(1.) Standard Profiles
1. Smoothie
2. Coffee
3. Multipurpose
4. Milkshake
(2.) Custom Profiles
Power
Mode
Slider Control Bar
Preprogrammed Cycle
Buttons
Cancel/Exit
Pulse
Figure 7. Control Surface
Select (Visible in Programming Mode)
Scroll (Visible in Programming Mode)
