12
Note: To return to the main menu from any submenu area, tap until the main
menu screen appears.
5.4.1 Selecting the Desired Profile
To select a profile, follow the steps below:
• Enter programming mode by touching and holding for 3 seconds. The
control surface will display and , and the LED screen will show the main
menu.
• The first menu item is
Profiles
. Touch to select this menu item.
• Then, to choose one of the standard profiles preprogrammed on the machine,
select
Standard Profiles
by touching . To choose a custom profile designed
via the Blend Wizard (see Section 5.4.5), touch to scroll to
Custom Profiles
.
• After selecting the standard or custom profile category, touch to scroll
through the profiles in the category, and touch to select the desired profile.
• The LED screen will list the selected profile and the question
Make this the
active profile?
Touch , which will load the blender with the profile, or touch
to return to the previous menu.
5.4.2 Changing Programmed Cycle Buttons
After loading the desired profile, complete the following steps to change one of the
blend cycles in the profile:
• Enter programming mode by touching and holding for 3 seconds. The
control surface will display and , and the LED screen will show the main
menu.
• Touch to scroll to the second menu item (
Blend Cycles
), and then touch
.
• On the next screen, select the first or second option. The first option (
Standard
Blend Cycles
) lists the cycles preprogrammed on the blender. The second
option (
Custom Blend Cycles
) lists the custom cycles that can be designed
via the Blend Wizard (see Section 5.4.5) and exported to the blender. Select
the first or second option by touching .
• Touch to scroll to the desired cycle, and then touch .
• The LED screen will then prompt you to choose which number on the control
surface you want to assign the cycle to. Touch the number, and then touch
to program the button with the selected cycle.
After the number button has been customized and you have returned to operation
mode, the profile name will be followed by an asterisk, indicating one or more of the
number buttons have been assigned blend cycles that are not the default cycles.
After a cycle button has been changed, if another profile is loaded on the blender
and then the previous profile is reloaded, the profile will load with the default cycles,
not with the cycles assigned through completing the steps above. To permanently
change the profile, do one of the following:
• Export the revised profile to a USB drive, and then import the profile on the
blender.
• Edit the profile using the Blend Wizard (
blendtec.com/commercial/program
),
and then export the profile to the blender (see Section 5.4.5).
