9
Button 4: Medium Smoothie 3
Button 5: Large Smoothie 4
Button 6: 50 Seconds @ Speed 7
Coffee Profile
Button 1: Small Margarita/Ice Cappuccino
Button 2: Large Ice Cappuccino
Button 3: Small Slushy/Milkshake
Button 4: Granita/Medium Milkshake
Button 5: Large Smoothie 2
Button 6: 50 Seconds @ Speed 7
Milkshake Profile
Button 1: Small Milkshake
Button 2: Granita/Medium Milkshake
Button 3: Milkshake w/Frozen Fruit
Button 4: Large Milkshake 1
Button 5: Large Milkshake 2
Button 6: Large Milkshake 3
When you turn your blender on the first time, the Multipurpose Profile will be the
active profile on the machine. (To change the active profile, see Section 5.4.1.) To
use one of the blend cycles in the profile, follow the steps below:
• Enter automatic operation mode by touching the mode icon so that numbers
1–6 appear on the control surface (see Figure 7). The LED screen will indicate
which profile is currently selected. (To activate a different profile, see Section
5.4.1.)
• Touch the control surface number that corresponds with the desired blend
cycle. The LED screen will show the time countdown (that is, seconds until the
cycle ends).
• To stop the cycle early, touch .
• If the pause cycle feature is enabled (see Section 5.4.7.3), the cycle can be
paused and then resumed.
▶
To start and then pause a blend cycle, touch the appropriate blend cycle
number on the control surface; when the motor begins, the control surface
will only display the blend cycle number corresponding with the selected
blend cycle.
▶
At the point in the cycle when the cycle should be paused, touch the
blend cycle number.
▶
To restart the cycle, touch the blend cycle number again.
