7.5.4 Imp/exp
This function allows you to copy current system configuration to other devices. It also
supports import, create new folder, and delete folder and etc function.
From Main menu->Setting->System->Import/Export, you can see the configuration file
backup interface is shown as below.
Export: Please connect the peripheral device first and then go to the following interface.
Click Export button, you can see there is a corresponding “Config_Time” folder. Double
click the folder, you can view some backup files.
Import: Here you can import the configuration files from the peripheral device to current
device. You need to select a folder first. You can see a dialogue box asking you to select
a folder if you are selecting a file. System pops up a dialogue box if there is no
configuration file under current folder. After successfully import, system needs to reboot
to activate new setup.
Format: Click Format button, system pops up a dialogue box for you to confirm current
operation. System begins format process after you click the OK button.
Note
System cannot open config backup interface again if there is backup operation in the
process.
System refreshes device when you go to the config backup every time and set current
directory as the root directory of the peripheral device.
If you go to the configuration backup interface first and then insert the peripheral
device, please click Refresh button to see the newly added device.