7. NVR Settings
To open the Main Menu on the local interface use the right click.
To open the Main menu on the web interface go to the click “Setup” on the top right bar
menu. Refer to chapter 5 to learn how to connect to the web interface.
7.1 Camera
7.1.1 Registration
7.1.1.1 Registration
The following menu allows you to add cameras that are on the same network as the NVR.
If you don’t have or you don’t want to add any camera at this point click the button “Skip”
to omit this step.
To add cameras follow the steps listed below.
1.
Click “device search” to perform a network scan looking for configured Blaupunkt VIO
cameras or ONVIF cameras on the network. (The cameras need to be connected to the
network before performing the scan).
2.
To add cameras to the NVR click on the left check box and select the desired cameras.
Now click “Add”.
3.
All the selected cameras will be added to the NVR and displayed on the bottom part
of the interface. The NVR will detect the cameras by Channels, from the first channel
D1 (the first camera on the list) to last channel D8 (The last camera from the list).