6.3.2
Date & Time
Here you can set device time. You can enable NTP (Network Time Protocol) function
so that the device can sync time with the NTP server.
Important: Stop record operation before making any modification.
System time: Set the system time according to your Time Zone. Default time
zone is GTM+1
Date format: There are three types: YYYYY-MM-DD: MM-DD-YYYYY or DD-MM-
YYYY.
Date separator: There are three denotations to separate date: dot, beeline and
solidus.
DST: Set DST time and date by week or by date. Input start time and end time.
By Default DST is enable according to Central Europe Time.
Time format: There are two types: 24-hour mode or 12-hour mode.
NTP: Set NTP server, port and interval.
Click Apply button to save settings
Note:
To change any configuration for this menu later on is possible to access this
menu from Main menu->Setting->System->General->Date&Time.