Blaupunkt TravelPilot DX-R4 Operating Instructions Manual Download Page 55

Page: 55 / 111

INTRODUCTION

NAVIGATION

RADIO MODE

CD MODE

INDEX

SETUP

CD CHANGER

ENGLISH

DEUTSCH

Simulating navigation

The TravelPilot provides you with the option of simulating a navigation session.
During the simulation, the system provides visual driving recommendations and
voice output in real-time.

If you want to start a navi simulation,

press the MEN button

✔

The navi menu is displayed.

Select the

NAVI SIMULAT.

menu item.

Press the right knob/pushbutton

;

Choose between

ROUND TRIP

and

ONE WAY

Press the right knob/pushbutton

;

✔

The main navigation menu appears.

Enter a destination.

✔

The navigation menu appears. An animated text with the word

DEMO

ap-

pears below the visual driving recommendations in the left of the display
area.

Summary of Contents for TravelPilot DX-R4
















































































































Search results

Summary of Contents for TravelPilot DX-R4

Reviews:

Related manuals for TravelPilot DX-R4

Brands by name

Popular brands

Blaupunkt TravelPilot DX-R4, Operating Instructions Manual

Search results

Summary of Contents for TravelPilot DX-R4

Reviews:

Related manuals for TravelPilot DX-R4

Brands by name

Popular brands