INTRODUCTION
NAVIGATION
RADIO MODE
CD MODE
INDEX
SETUP
CD CHANGER
34
Changing the audio source
You can change the audio source at any time during navigation.
1
Press the TU
A
or CD-C
?
button during an active navigation session.
✔
The main menu for radio mode or CD changer mode opens. CD changer
mode is only available if a CD changer is connected and operational. It is
not possible to play a CD in the internal CD drive during a navigation
session.
2
Now, for instance, you can select another station or another track.
If you want to switch back to the navigation session display,
3
press the NAV button
<
.
Cancelling navigation
To cancel an active navigation session,
1
press the ESC button
9
or
1
enter a new destination or
1
switch to position tracking mode (see “Position tracking mode” in this
chapter).
✔
If you pressed the ESC button
9
, the system asks you to confirm your
choice.
If you are sure you want to cancel navigation,
4
select
YES
and
5
press the right knob/pushbutton
;
.
TIP: If you switch the unit off whilst navigation is active, the data for that
navigation session will be stored for 30 minutes. You can continue navi-
gation at any time within this time period (e.g. after stopping for petrol).
Note: If you remove the navigation CD during a navigation session,
NO MAP navigation will be activated.
NAVIGATION
TO INTERRUPT
ROUTE GUIDANCE?
DO YOU WANT
YES
NO
Confirmation request before cancelling navigation
