INTRODUCTION
NAVIGATION
RADIO MODE
CD MODE
INDEX
SETUP
CD CHANGER
104
Resetting to the factory defaults
You can reset the TravelPilot to its default settings. This affects all the settings
for the navigation system and the audio sources.
1
Select
DEFAULT SET.
from the setup menu.
Step 1: If a navigation CD is inserted, you will be asked whether you want to
reset the navigation system’s values. This affects all of the destination memory
and the route options. If no navigation CD is inserted, the next query is dis-
played straight away.
2
If you want to delete the settings, press
YES
or
2
to retain the navigation system’s settings, select
NO
.
Step 2: This query refers to deleting the name and playlist memory for CD mode.
3
To reset the settings, select
YES
, otherwise
3
select
NO
.
Step 3: The last step affects all the options, all the setup settings and all the
sound settings of the audio sources.
4
If you want to delete the settings, press
YES
or
4
to retain the settings, select
NO
.
If you confirmed at least one item with
YES
, the device will be reset. The unit is
then switched off and back on.
Note: A table containing the factory default settings for the device
is located at the end of this chapter.
SETTINGS
INSTALL
DEFAULT SET.
FM-SEEK
SENS
SAFETY
LANGUAGE
