Blaupunkt TravelPilot DX-R4 Operating Instructions Manual Download Page 38

Page: 38 / 111

INTRODUCTION

NAVIGATION

RADIO MODE

CD MODE

INDEX

SETUP

CD CHANGER

Sorting the tour

To sort the tour,

select the

SORT DEST.

item in the

TOUR LIST

menu.

Press the right knob/pushbutton

;

✔

The tour list is displayed.

Highlight the destination that you want to reposition.

Press the right knob/pushbutton

;

✔

A reposition marker appears in front of the destination.

Use the right knob/pushbutton

;

to move the destination to the required

position.

Press the right knob/pushbutton

;

Proceed as described with all the destinations to sort them into the order you
require.

Deleting a tour destination

To delete a tour destination,

select the

CANCEL DEST.

item in the

TOUR LIST

menu.

Press the right knob/pushbutton

;

✔

A selection menu is displayed.

Highlight

SINGLE DEST.

Press the right knob/pushbutton

;

✔

The tour list is displayed.

Highlight the destination you want to delete.

Press the right knob/pushbutton

;

✔

A confirmation request is displayed.

Highlight

DELETE

Press the right knob/pushbutton

;

TOUR LIST

STORE DEST.

NEW DEST.

START TOUR

CANCEL DEST.

SORT DEST.

TOUR LIST

STORE DEST.

NEW DEST.

START TOUR

CANCEL DEST.

SORT DEST.

Summary of Contents for TravelPilot DX-R4
















































































































Search results

Summary of Contents for TravelPilot DX-R4

Reviews:

Related manuals for TravelPilot DX-R4

Brands by name

Popular brands

Blaupunkt TravelPilot DX-R4, Operating Instructions Manual

Search results

Summary of Contents for TravelPilot DX-R4

Reviews:

Related manuals for TravelPilot DX-R4

Brands by name

Popular brands