manualshive.com logo in svg

Blastrac BMS-270LPII, Operating Instructions Manual

Share
Download
Blastrac BMS-270LPII Operating Instructions Manual Download Page 7

 

Revision B 

Revised 5/20/2003 12:33 PM 

5

 

Operating Instructions                                                               BMS-270LPII 

Technical Data

 

 

 

1.3 

Operative Range and Correct Usage 

 
The BMS-270LPII is designed to remove VAT, VCT, ceramic tile, hardwood floors, 
mastic and cementitious materials from horizontal surfaces.  Using the multiscraper for 
purposes other than its intended use may result in equipment damage, property damage, 
and injury or death to the operator and surrounding personnel.  The manufacturer will not 
be liable for damages, injury or death resulting from improper usage of the multiscraper 
by the multiscraper owner or renter.   
 
 
 
 

1.4 Machine 

Code 

 
 

BMS – 270LPII 

 

B  --  lastrac   

 

270 Width of Blade (27.0 inches) 

 
M  -- ulti 

 

 

LP  Liquid Propane 

 
S  --  craper   

 

II    Second Generation 

Summary of Contents for BMS-270LPII




























































Reviews:

No comments

Brands by name

Popular brands

Load more brands