Revision B
Revised 5/20/2003 12:33 PM
11
Operating Instructions BMS-270LPII
Safety Precautions
2.4 Precautions
Gases, Dust, Steam, Smoke
Do not weld, flame cut or perform grinding work on the multiscraper without written
authorization from the manufacturer. The danger of fire or explosion exists when work
of this nature is done. Begin maintenance work only when the multiscraper is put into its
Maintenance Mode as outlined in Section 2.5.
Before welding, cutting or grinding
on the multiscraper, remove all dust and combustible
materials from the area and provide adequate ventilation to reduce the risk of fire or
explosion.
When working in a confined space, adhere to the appropriate safety regulations.
Place fire extinguishers and fire blankets within easy reach of potential fire hazards.
DANGER: Engine exhaust gases contain poisonous carbon monoxide. Carbon
monoxide is an odorless and colorless and can cause injury or death if inhaled. Do
not use equipment indoors without adequate ventilation. Refer to OSHA guidelines
and regulations concerning maximum levels of exposure to carbon monoxide gases
and other hazards associated with using internal combustion engines.
