Revision B
Revised 5/20/2003 12:33 PM
28
Operating Instructions BMS-270LPII
Operation
6.1 Start-up
Procedure
1.
Open propane tank valve by turning knob CCW until fully open.
2.
Operator must be seated in seat, with seat adjusted to a position that allows for
optimum comfort and viewing of work area. The multiscraper will not start
unless the operator is seated.
3.
Engage parking brake (item #2, Section 3.6) to limit multiscraper movement upon
starting.
4.
Release E-stop button (item #3, Section 3.6).
5.
Insure that motion control joystick (item #1, Section 3.6) is in its “centered” or
center position (see Section 10.2 “Hydrostatic Pump”).
6.
Start multiscraper with ignition switch (item #6, Section 3.6).
7.
Adjust throttle (item #4, Section 3.6) to desired RPM, not to exceed 3500 RPM
(see Section 10.3 “Auxiliary Pump”) as indicated on the tachometer (items #7,
Section 3.6).
8.
Turn on lights (item #8, Section 3.6).
9.
Release parking brake.
10.
Begin work.
