Revision B
Revised 5/20/2003 12:33 PM
32
Operating Instructions BMS-270LPII
Maintenance
7.1 Instructions
Prior to performing maintenance and inspection work read and fully understand the
BMS-270LPII operating instructions.
Insufficient or improper maintenance could result in very high repair costs and long down
time for the multiscraper. Regular maintenance is important for maximizing safety and
cost effective performance.
The following timetable contains inspection and maintenance information that should be
followed to minimize premature failure of components and maximize multiscraper
performance.
This information is based on continuous operation. Refer to the hour meter on the
multiscraper to determine the time the multiscraper has been in use.
Because of different operating conditions, the time intervals for normal wear, inspection,
maintenance and repair cannot be exact. Individual operating conditions will necessitate
more customized schedules.
Please do not hesitate to contact your Blastrac
®
specialist if further advice is needed.
Before any maintenance or repair work is performed on the multiscraper,
precautions must be taken to ensure that the multiscraper cannot be turned on
accidentally. It is recommended that the multiscraper be placed in its
“Maintenance Mode” condition as outlined in Section 2.5.
WARNING: Please refer to the specific safety and maintenance
recommendations throughout this manual and the manuals of the components
being maintained before attempting any maintenance. Failure to adhere to
these recommendations could result in equipment damage, serious injury or
death.
