Revision B
Revised 5/20/2003 12:33 PM
10
Operating Instructions BMS-270LPII
Safety Precautions
2.3 Safety
Precautions/Maintenance
Adjustments, maintenance and inspection instructions given in the manual must be
followed at the suggested intervals as well as recommendations for the replacement of
parts or assemblies. These activities must be carried out by qualified personnel.
Before carrying out any activities that could affect multiscraper operation, changes in
production, the tooling or the adjustment of the multiscraper or any related safety device
,
follow the recommendations given in this instruction manual. When the multiscraper has
been put in a Maintenance Mode as outlined in Section 2.5 in order to perform
maintenance or repair work, precautions must be taken to ensure that it cannot be turned
on inadvertently.
Before carrying out maintenance or repair work, let the engine and the exhaust system
cool down; remove all traces oil, combustible fuel or cleaning fluids from the scraper, its
connections and fittings, in particular. Do not use any aggressive cleaning products. Be
sure that all cleaning rags are fiber free. Retighten all loose fittings found during
maintenance and repair work!
If it is necessary to dismantle safety devices during retooling, maintenance or repair
work, be sure that they are reinstalled properly and working before starting the
multiscraper.
Dispose of oils, liquids and used parts in accordance with local environmental
regulations.
