Revision B
Revised 5/20/2003 12:33 PM
20
multiscraper when it is in motion.
Operating Instructions BMS-270LPII
General
3.6 Operating Controls Cont’d
3.
Emergency Stop Button
A.
Push button down, all power is shut down. Multiscraper is now in the “off”
mode.
B.
Lift button up to release. This will allow the engine to be restarted.
4.
Throttle
A.
Push button on top and pull up to increase the engine speed (course adjustment
up).
B.
Twist knob CCW to increase RPM (fine adjust up) and CW to decrease RPM
(fine adjust down).
C.
Push in button on top and push knob down to reduce engine speed to idle (course
adjustment down).
5.
Blade Control Joystick w/ Rocker Switch
A.
Depress right side of rocker switch to lower blade.
B.
Depress left side of rocker switch to raise blade.
6.
Ignition Switch
A.
All the way CCW, switch is in off position.
B.
In mid-position, switch is on.
C.
All the way CW, switch is in the start position. The switch is spring-loaded and
will return to the on position when released.
7.
Tachometer
A.
Digitally represents engine RPM when multiscraper is on.
B.
Digitally represents multiscraper usage time in hours.
8.
Light Switch
A.
Forward position – ON.
B.
Backward position - OFF.
9.
Oil Cooler Fan (under engine enclosure)
A.
Turn ignition key switch to on, mid-position, to turn on fan.
B.
Turn ignition key switch to off, full CCW position, to turn off fan.
