27
Valid for GHY version from serial number: 25697B (11-2018).
Checking oil level/adding oil
Procedure.
1
Switch off the engine and wait several minutes for the engine oil to collect in the crankcase.
engine must but level.
2
Remove contamination on the engine in the area of the dipstick.
3
Pull out the dipstick (1) and clean it.
4
Reinsert the dipstick (1) all the way to pos. A.
5
Pull out the dipstick again and check the oil level.
6
If the oil level is close to the min. mark, add engine oil to the engine.
7
Remove contamination on the engine in the area of the Oil plug (2).
8
Remove Oil plug (2)
9
add engine oil to the max. mark.
10
Close Oil plug (2)
11
For the specification and viscosity, see chapter
5.7 Checking and refilling the engine oil
.
12
Reinsert the dipstick(1) all the way to pos. A.
CAUTION
Danger of later engine damage.
Operating the engine with an oil level below the
min.
mark or
above the
max.
mark can lead to engine damage.
When checking the oil level, the engine must be horizontal and
have been switched off for a few minutes.
1
Dipstick
2
Oil plug
