28
Valid for GHY versions up to serial number: 25697B (11-2018).
Checking oil level/adding oil
Procedure.
1
Switch off the engine and wait several minutes for the engine oil to collect in the crankcase.
engine must but level.
2
Remove contamination on the engine in the area of the dipstick.
3
Pull out the dipstick (1) and clean it.
4
Reinsert the dipstick and screw it tight.
5
Pull out the dipstick again and check the oil level.
6
If the oil level is close to the min. mark, add engine oil to the max. mark.
7
Reinsert the dipstick and screw it tight.
8
For the specification and viscosity, see chapter
5.7 Checking and refilling the engine oil
.
1
Dipstick
2
Oil refilling container
