Blastrac BMP-335 EHY, Operating Instructions Manual

Page: 22 / 40

22
5.4 Switching off the machine EHY and GHY versions
Switch off the machine EHY
 Pull the quick lift lever up and turn the fine adjustment until the cutters do not hit the ground
anymore.

Push both red buttons on the electrical box.
 Wait until all turning parts have reached a standstill.
 Switch off the dust collector.
 Disconnect the power supply.
 Pay attention that all twisting and turning machine parts have reached a standstill before inspection or
maintenance duties are carried out.
Switch off the machine GHY
versions up to serial number: 25697B (11-2018)

Pull the quick lift lever up and turn the fine adjustment until the cutters do not hit the ground
anymore.
 Push the speed control lever all the way to the "Stop" position. (see photo )
Photo speed control lever. Stop position.
 Wait until all turning parts have reached a standstill.
 Remove the starting key.

Seal the ignition lock with the protective cap.
 Switch off the dust collector.
 Turn the earth switch into a horizontal position. See photos below.
 Pay attention that all twisting and turning machine parts have reached a standstill before inspection or
maintenance duties are carried out.