20
Procedure to start work (GHY version)
Turn on the dust collector
Check if the treadle of the drive system is down, and the driving lever is in the neutral position.
Turn the earth switch into a vertical position. See photos 2.1.
Turn the starting key to position "0", every time you want to start the engine. (See photo 2.2).
Check the throttle lever, first move the throttle lever to the stop position. (see photo 2.3)
Depending on the situation, place the throttle lever in either the "½" or "start" position.( see photo 3
and 4).
Photo 3. "½" position
Photo 4. "start" position.
Insert the starting key all the way and turn to position (I). (see photo2.2)
Turn the key to position (II). (see photo 2.2). As soon as the engine is running, release the starting
key. The starting key springs back into position "I" and remains in this position during operation.
Slowly let down the quick lift lever.
Turn the fine adjustment clockwise until the desired depth is reached.
Push the driving lever forward to drive the machine forwards. This must be done once the machine is
on the floor.
Photo 2.1
Photo 2.2
Photo 2.3
