34
15.
Apply body caulking as shown in the picture.
16.
Place the left and right valve
next to each other. The
“windows” of the control cages
should be mirrored.
Point “A” should be in the middle.
Point “B” is over 90° further, so it
should be slightly beyond the
middle.
Fasten the M10 nuts if the cages
are in the correct position.
Mount the covers back on. Use
M8x20 bolts, do not use longer
bolts! Longer bolts could damage
the actuator.
Step 15
Replace the worn out nuts if
necessary
Clean the threads
