31
3.
Remove the M6 bolts (3x) and remove the shield.
4.
Remove the M6 locking nuts (2x) and remove the springs.
5.
Loosen the M4 bolts (2x), release the tension springs and remove the pen.
6.
Pull the valve up and remove the M6 bolts (2x) from the bush.
7.
Remove the valve rubber.
8.
Replace the O-ring (E10364) and
Valve seal (E09270).
9.
Apply Loctite 243 on the M5x16 bolts
(3x) when the new Valve seal is in
place.
Step 3
Shield
Step 4
Spring
Step 5
Step 6
Step 7
Step 8
O-ring
Valve seal
Step 9
