32
10.
Pinch the new Valve rubber (E09280) in so it will fit through the
window. Push the Valve rubber down until it goes no further.
11.
Mount the bush on top of the valve with a M6 bolt.
Slide the valve halfway down and mount the actuator on the bush with a M6 bolt.
12.
The aluminium ring has 3 threaded holes in the side, these should line up with the 3 holes in the
abrasive valve housing. Place the shield on the correct position and fasten the aluminium ring with the
M6 bolts (3x).
Step 10
Bush
Step 11
Aluminium ring
Shield
Actuator
Step 12
Align with
aluminium ring
