BH North America Corporation • 20155 Ellipse • Foothill Ranch • CA • 92610
www.bladezfitness.com
11
Start/Ready position.
COMPUTER CONSOLE CONTINUED
It will go back to the Start/Ready position after 30 seconds in the Run End position (or if you
press the Stop key).
The time pre-set value is 0, range 20
–
99,when the time is set at 20 minutes , you can press
▲▼
or
+/–
keys to increase or decrease. The increase step is 1, if decrease , it will go back to
0 directly. The matrix window moves counterclockwise like along a racetrack.
Program Mode
P1 Manual
Time: pre-set 0 min; range 20–99 min, step 1 min.
P2 9 hole
LEVEL: pre-set 1, range 1–10, step 1, 2.17 mi (3.5 km) is based on distance.
P3 hill climb
LEVEL: pre-set 1, range 1–10, step 1.
Time: pre-set 30 min; range 20–99 min, step 1 min.
P4 hill run
LEVEL: pre-set 1, range 1–10, step 1.
Time: pre-set 30 min, range 20–99 min, step 1 min.
P5 interval
LEVEL: pre-set 1, range 1–10, step 1.
Time: pre-set 30 min, range 20–99 min, step 1 min.
P6 rolling
LEVEL: pre-set 1, range 1–10, step 1.
Time: pre-set 30 min, range 20–99 min, step 1 min.
P7 Weight loss LEVEL: pre-set 1, range 1–10, step 1.
Time: pre-set 30 min, range 20–99 min, step 1 min.
P8 Custom
Time: pre-set 30 min: range 20–99 min, step 1 min.
PROGRAM has 30 levels in all (SE01–SE30) and the pre-set values are all lowest value.
Setting: time, program execute value (setting time will execute in 30 levels equally).
(1) After entering the program control function, the
LEVEL
light will be on and the window will
blink. This function is to choose the exercise intensity level (
L1 - L10).
You can press
▲▼
or
+/–
to change it to your required level and press ENTER to confirm.
(2) After the level is confirmed, the
TIME
window will blink. Press
▲▼
or
+/–
to set up the
exercise time, or you can press START directly to start the exercise with count up.
** Range of time: 20
–
99 min, The pre-set value is 30 min, step is 1 min.
Error Signal Display:
E1: The treadmill can’t read the speed value.
E6: In the range of ADC, incline motor doesn’t run.
E7: Incline is too high or too low (exceeds the range).
