BladeZ Corporation • 20155 Ellipse • Foothill Ranch • CA • 92610
www.ebladez.com
11
GETTING STARTED CONTINUED
KEY FUNCTIONS
QUICK/START
– This key is used to begin any treadmill program or quick
start.
MODE
– This key is used to enter into the program mode.
ENTER
– This key is used to lock in your selection such as Program, Level
and Time. Press and HOLD this key for 10-15 seconds to change from
metric to English system.
STOP/RESET
– This key is used to stop the treadmill at any time. Press the
STOP/RESET button and hold for 3 seconds and the treadmill will reset
itself.
These keys are used to adjust the speed of the treadmill.
They are also used to change values during programming.
These keys are used to adjust the elevation of the treadmill.
They are also used to change values during programming.
INSTANT SPEED KEYS
– You can change the speed of the treadmill by
pressing one of the Instant Speed Key buttons. Each key represents the
assigned value in Miles per hour (MPH). Choose from 1 2 4 6 8 10 MPH.
INSTANT ELEVATION KEYS
– You can change the elevation of the
treadmill by pressing one of the Instant Elevation Key buttons. Each key
represents the assigned percentage of elevations. Choose from 2 4 6 8 10 12%.
PERSONAL COOLING FAN
1.
Your Bladez 9.9T is equipped with a 2 speed personal cooling fan.
2.
Turn on your Personal Cooling Fan by pressing the FAN Button
.
3.
Press the FAN button
again to change the speed to low.
4.
Press the FAN button
again to turn the fan off.