P R O G R A M W H E E L S I Z E , U N I T S A N D C H R O N O G R A P H
ENGLISH
P R O G R A M W H E E L S I Z E , U N I T S A N D C H R O N O G R A P H
ENGLISH
3 5
S T E P S 2 &
3
S T E P 4
S T E P 5
S T E P 6
S T E P S 7 & 8
S T E P B Y S T E P — E N T E R A N E X A C T W H E E L S I Z E
S T E P B Y S T E P — S E T S P E E D A N D D I S T A N C E U N I T S
1. Upon entering the SET Speed and Distance units display, M/H (Miles per
Hour) or KM/H (Kilometers per Hour) will flash in the upper right hand corner
of the display.
2.
QUICK PRESS
the OPTION key to cycle between M/H and KM/H settings.
3. Select your choice using a
QUICK PRESS
of the MODE key and advance to the
SET Chronograph function display.
S T E P B Y S T E P — S E T C H R O N O G R A P H F U N C T I O N
1. Upon entering the SET Chronograph function display, RT (Ride Time) or TT
(Total Time) will flash in the upper right hand corner of the display.
2.
QUICK PRESS
the OPTION key to cycle between RT and TT (Total Time)
settings.
3. Select your choice using a
QUICK PRESS
of the MODE key and exit the setting
sequence.
RIDE TIME (RT)
—When RT is selected the Delphi’s Chronograph will start and stop with
the motion of the wheel. This setting tracks the actual time you are riding your bike.
TOTAL TIME (TT)
—When TT is selected the Delphi’s Chronograph will initially start with
the first rotation of the wheel. However, it will continue to run from that point, until
the timing is stopped, using a
QUICK PRESS
of the START/STOP key.
S T E P S 1 & 2
( S P E E D / D I S T A N C E )
S T E P S 1 & 2
( C H R O N O G R A P H )
3 6
C Y C L E C O M P U T E R
Blackburn_4/5/6_Manual 8/3/05 9:58 AM Page 38
