Blackburn Delphi Computers allow you to program two separate bike functions. Most functions are totally
independent. For example, you can program Bike One for Ride Time in Miles and Bike Two for Total Time in
Kilometers.
NOTE:
Before you can program any computer settings, the primary chronograph must be cleared to zero
using a 2-second
PRESS & HOLD
of the S/S key while in the Ride Distance (DST) screen.
C H A N G E B I K E 1 / B I K E 2 S E T T I N G
PRESS & HOLD
both the MODE and OPTION keys at the same time. When Bike 1-2 icon changes, release
the keys.
B I K E O N E / B I K E T W O S E T T I N G
P R O G R A M W H E E L S I Z E , U N I T S A N D C H R O N O G R A P H
ENGLISH
ENGLISH
2 9
Blackburn Delphi Computers use the rolling circumference of your wheel and tire combination to determine
speed and distance. The more accurate this setting, the more accurate your ride information will be.
However, variations of less than 30mm from the actual circumference will have very little impact on the
overall accuracy of the unit.
P R E S E T W H E E L S I Z E S
For easy setup, Blackburn Delphi Computers come
with 11 of the most popular wheel/tire sizes
pre-programmed into the unit. Simply select the size
of your tire as you scroll through the list in the
programming sequence and you are done.
The following are the pre-set wheel sizes programmed
into the unit. Follow the steps on Page 33 to enter a
preset wheel size into the Delphi unit.
3 0
C Y C L E C O M P U T E R
Blackburn_4/5/6_Manual 8/3/05 9:58 AM Page 32
