P R O G R A M W H E E L S I Z E , U N I T S A N D C H R O N O G R A P H
P R O G R A M W H E E L S I Z E , U N I T S A N D C H R O N O G R A P H
ENGLISH
ENGLISH
S T E P B Y S T E P — E N T E R A P R E - P R O G R A M M E D W H E E L S I Z E
1. Choose Bike 1 or Bike 2. (Page 29)
2. Starting in the Distance (DST) screen of the Lower Display Window.
3.
PRESS & HOLD
the MODE key for approximately 2- seconds.
4.
QUICK PRESS
the OPTION or START/STOP keys to scroll through the 11 pre-programmed wheel sizes.
"WHEEL" will be shown in the lower line of the display with the pre-programmed wheel size shown in
the center line of the display.
5. Select your choice using a
QUICK PRESS
of the MODE key and advance to the SET Speed and
Distance units display (Page 36).
S T E P S 2 & 3
S T E P 4
S T E P 5
S T E P B Y S T E P — E N T E R A N E X A C T W H E E L S I Z E
1. Choose Bike 1 or Bike 2. (Page 29)
2. Starting in the Distance (DST) screen of the Lower Display Window.
3.
PRESS & HOLD
the MODE key for approximately 2- seconds.
4.
QUICK PRESS
the OPTION or START/STOP keys until the display shows 2096 flashing in the center
line of the display.
5.
QUICK PRESS
the MODE key once. The ones digit will begin to flash.
6. Adjust the digit using
QUICK PRESSES
of the OPTION and START/STOP keys and enter your choice
into memory using a
QUICK PRESS
of the MODE key.
7. Repeat until all digits are entered
8. A final
QUICK PRESS
of the MODE key will exit the Wheel Size setting sequence and advance to the
SET Speed and Distance units Display (Page 36).
NOTE:
Before you can program any computer settings, the primary chronograph must be cleared to zero
using a 2-second
PRESS & HOLD
of the S/S key while in the Ride Distance (DST) screen.
3 4
C Y C L E C O M P U T E R
3 3
Blackburn_4/5/6_Manual 8/3/05 9:58 AM Page 36
