Blackbox 3-Slot 24 Fast Ethernet + 2 Gigabit L2 Managed Switch with Redundant Power, User Manual

Page: 41 / 255

User Manual
Publication date: March, 2006
Revision A2
33
Fig. 3-4 slot detail information
In Fig. 3-4, it shows the basic information of the clicked fiber module. With
this, you’ll see the information about the serial number and hardware-mechanical
version of the module you selected. In fiber module, the connector, mode, fiber
cable, wavelength, distance and speed will be displayed as well. For more
information, please refer to Section 3-2-1 about the parameter description of slot 1-3.
As to the small icon beside the front panel image, it is used to switch the front
or the back panel of the switch on the screen. The user also can see that whether
the power supply is normal or not on the back panel by clicking the small icon. If
the color of the power image displays silver color, it represents that the power is
supplied normally; otherwise, it may show red color.
⎯
On the left-top corner, there is a pull-down list for Auto Logout. For the sake of
security, we provide auto-logout function to protect you from illegal user as you
are leaving. If you do not choose any selection in Auto Logout list, it means
you turn on the Auto Logout function and the system will be logged out
automatically when no action on the device 3 minutes later. If OFF is chosen,
the screen will keep as it is. Default is ON.
⎯
On the left side, the main menu tree for web is listed in the page. They are
hierarchical menu. Open the function folder, a sub-menu will be shown. The
functions of each folder are described in its corresponded section respectively.
When clicking it, the function is performed. The following list is the full function
tree for web user interface.