Blackbox 3-Slot 24 Fast Ethernet + 2 Gigabit L2 Managed Switch with Redundant Power User Manual Download

Page: 85 / 255

User Manual

Publication date: March, 2006

Revision A2

3-7. MAC Table

MAC Table Configuration gathers many functions, including MAC Table

Information, MAC Table Maintenance, Static and MAC Alias, which cannot be
categorized to some function type. They are described below.

Function name:

MAC Table Information

Function Description:

Display the static or dynamic learning MAC entry and the state for the selected
port.

Parameter description:

Port:

Select the port you would like to inquire.

Search:

Set up the MAC entry you would like to inquire.

The default is ??-??-??-??-??-??

MAC:

Display the MAC address of one entry you selected from the searched
MAC entries table.

Alias:

Set up the Alias for the selected MAC entry.

Set Alias:

Save the Alias of MAC entry you set up.

Search:

Find the entry that meets your setup.

Move to the previous page.

Move to the next page.

Alias:

The Alias of the searched entry.

MAC Address:

The MAC address of the searched entry.

Summary of Contents for 3-Slot 24 Fast Ethernet + 2 Gigabit L2 Managed Switch with Redundant Power
































































































































































































































































Search results

Summary of Contents for 3-Slot 24 Fast Ethernet + 2 Gigabit L2 Managed Switch with Redundant Power

Reviews:

Related manuals for 3-Slot 24 Fast Ethernet + 2 Gigabit L2 Managed Switch with Redundant Power

Brands by name

Popular brands

Blackbox 3-Slot 24 Fast Ethernet + 2 Gigabit L2 Managed Switch with Redundant Power, User Manual

Search results

Summary of Contents for 3-Slot 24 Fast Ethernet + 2 Gigabit L2 Managed Switch with Redundant Power

Reviews:

Related manuals for 3-Slot 24 Fast Ethernet + 2 Gigabit L2 Managed Switch with Redundant Power

Brands by name

Popular brands