manualshive.com logo in svg

Blackbox 3-Slot 24 Fast Ethernet + 2 Gigabit L2 Managed Switch with Redundant Power, User Manual

The Blackbox 3-Slot 24 Fast Ethernet + 2 Gigabit L2 Managed Switch with Redundant Power is a high-performance networking solution designed to meet your business needs. This user-friendly product provides seamless data transfer and reliable power redundancy. For easy setup and troubleshooting, a comprehensive User Manual is available for free download on manualshive.com.

Share
Download
background image

User Manual   

 

Publication date: March, 2006 
Revision A2 

66 

 

 

Parameter description:

 

IGMP snooping mode selection: 

The switch supports three kinds of IGMP Snooping status, including 
“Passive”, “Active” and “Disable”. 

Disable: 

Set “Disable” mode to disable IGMP Snooping function.  

    Default: Disable 

Active: 

In Active mode, IGMP snooping switch will periodically issue the 
Membership Query message to all hosts attached to it and 
gather the Membership report message to update the database 
of the Multicast table. By the way, this also reduces the 
unnecessary multicast traffic. 

Passive:  

In Passive Snooping mode, the IGMP snooping will not 
periodically poll the hosts in the groups. The switch will send a 
Membership Query message to all hosts only when it has 
received a Membership Query message from a router. 

IP Address: 

Show all multicast groups IP addresses that are registered on this device. 

VLAN ID: 

Show VLAN ID for each multicast group. 

Member Port: 

Show member ports that join each multicast group. Member port may be 
only or more than one. 

Summary of Contents for 3-Slot 24 Fast Ethernet + 2 Gigabit L2 Managed Switch with Redundant Power
































































































































































































































































Reviews:

No comments

Related manuals for 3-Slot 24 Fast Ethernet + 2 Gigabit L2 Managed Switch with Redundant Power

4RF Aprisa LTE Quick Start Manual preview
Aprisa LTE
Brand: 4RF Pages: 7
Paradyne 7610 Overview preview
7610
Brand: Paradyne Pages: 2
IBM BladeCenter Management Module Installation And User Manual preview
BladeCenter Management Module
Brand: IBM Pages: 184
Eicon Networks Diva 2440 Quick Start Manual preview
Diva 2440
Brand: Eicon Networks Pages: 32
Allied Telesis AT-8550/SP Series Installation Manual preview
AT-8550/SP Series
Brand: Allied Telesis Pages: 114
Belkin AC 1600 DB User Manual preview
AC 1600 DB
Brand: Belkin Pages: 57
Xenya XS26GS User Manual preview
XS26GS
Brand: Xenya Pages: 189
B+B SmartWorx spectre lte User Manual preview
spectre lte
Brand: B+B SmartWorx Pages: 52
axing EOC 30-01 Quick Start Manual preview
EOC 30-01
Brand: axing Pages: 4
CNC-Step AceroDURO 100/S100 Operating Instructions Manual preview
AceroDURO 100/S100
Brand: CNC-Step Pages: 86
Alcatel-Lucent 9364 Installation And Commissioning Manual preview
9364
Brand: Alcatel-Lucent Pages: 60
Microtek MiniLink Operation Manual preview
MiniLink
Brand: Microtek Pages: 25
VERTO 52G710 Instruction Manual preview
52G710
Brand: VERTO Pages: 48
Ubiquiti EdgeRouter X ER-X-SFP Quick Start Manual preview
EdgeRouter X ER-X-SFP
Brand: Ubiquiti Pages: 20
Me VS-M1 Instructions Manual preview
VS-M1
Brand: Me Pages: 28
Billion BiPAC 645 Quick Start Manual preview
BiPAC 645
Brand: Billion Pages: 16
Planet Networking & Communication VRT-311 User Manual preview
VRT-311
Brand: Planet Networking & Communication Pages: 147
Tripp Lite N306-05M Specification Sheet preview
N306-05M
Brand: Tripp Lite Pages: 2

Brands by name

Popular brands

Load more brands