TROJAN.
Instruction Manual
8
C/A glue
Cut
Plastic strap
Plastic leg cover
JOINING THE WING HALVES.
1. Using a modeling knife, remove the cov-
ering wing.
3. Test fit the dihedral brace into each wing
half. The brace should slide in easily . If not,
use 220 grit sandpaper with a sanding block
and sand down the edges and ends of the
brace until it fits properly.
2. Location the aluminium wing dihedral
brace.
Remove
covering.
Top side
Repeat the procedure for the other gear
.
