TROJAN.
Instruction Manual
18
Control horns install as same as method of
aileron wing. See pictures below:
5. When you are sure that everything is
aligned correctly, mix up a generous amount
of 30 minute epoxy. Apply a thin layer to the
top and bottom of the stabilizer mounting area
and to the stabilizer mounting platform sides
in the fuselage. Slide the stabilizer in place and
re-align. Double check all of your
measurements one more time before the
epoxy cures. Hold the stabilizer in place with
T-pins or masking t ape and remove any ex-
cess epoxy using a paper tower and rubbing
alcolhol.
Expoxy glue.
C/A glue.
C/A glue.
C/A glue.
ELEVATOR CONTROL HORN INSTALLA-
TION.
