TROJAN.
Instruction Manual
16
Trim and cut.
Machine screw.
2. While keeping the back edge of the
cowl flush with the marks, align the front of
the cowl with the crankshaft of the engine. The
front of the cowl should be positioned so the
crankshaft is in
nearly
the middle of the cowl
opening. Hold the cowl firmly in place using
pieces of masking tape.
4. Install the muffler and muffler extension
onto the engine and make the cutout in the
cowl for muffler clearance. Connect the fuel
and pressure lines to the carburetor , muffler
and fuel filler valve.
3. Slide the cowl back over the engine
and secure it in place using four wood screws.
See picture below.
ELEVATOR INSTALLATION.
2. Mount the servo to the tray using the
mounting screws provided with your radio
system.
1. Install the rubber grommets and brass
collets into the elevator servo. Test fit the servo
into the servo tray.
SERVO INSTALLATION.
