Black+Decker FX648-B5, Original Instructions Manual

Page: 8 / 28

8
ENGLISH
(Original instructions)
Dishwasher Safe
All removable parts are dishwasher safe excluding food
processing bowl, blender jar and grinder mill.
Quick-cleaning the food processor bowl and
blender jar
1. Pour lukewarm water (not more than 0.5 litres) and
some washing-up liquid into the food processor bowl or
blender jar.
2. Place the lid on the food processor bowl or blender jar
and turn it clockwise to fix it.
3. Select the speed setting that corresponds with the
accessory.
4. Let the appliance run until the food processor bowl or
blender jar is clean or for 30 seconds.
5. Detach the blender jar or food processor bowl and rinse
it with clean water.
Storage
You can wind the cord around the bottom of the appliance.
Mains plug replacement
If a new mains plug needs to be fitted:
• Safely dispose of the old plug.
• Connect the brown lead to the live terminal in the new
plug.
• Connect the blue lead to the neutral terminal.
• If the product is class I (earthed), connect the
green/yellow lead to the earth terminal
Note! If your product is class II double insulated (only 2 wires
in the cord set), no connection is to be made to the earth
terminal.
Follow the fitting instructions supplied with good quality plugs.
Any replacement fuse must be of the same rating as the
original fuse supplied with the product.
Warning! The above section on mains plug replacement is for
authorized service centre persons.
Troubleshooting
Before calling the Customer Service Number, carefully check
the list below for a possible solution to your question.
Potential problem Probable cause/solution
Unit does not operate on • Is the unit plugged in? Does the outlet work?
any speed or Pulse. • Are the bowl, bowl lid, and food chute lid all locked in place? See “How to Assemble.”
Food is not chopped, • Packing too much food in the food chute, or pushing too hard on the food pusher may
sliced or shredded uniformly. cause the processed food to be irregulary sliced or shredded. Refer to the food
processing charts for recommended sizes and quantities.
Unit stops and will not • Are the bowl, bowl lid, and food chute lid all locked in place? They may have moved
come back on. slighty during processing. See “How to Assemble.”
• Is the outlet still working? Check it by plugging in a working lamp or other appliance.
You may have overloaded the circuit and blown a fuse or tripped the circuit breaker.
• Turn unit OFF, allow to stand for 3 to 4 minutes, then turn back ON. If none of these
suggestions correct the problem,DO NOT attempt to repair the unit. Call the Customer
Service number to get the name of your nearest Authorized Service Center.
Unit has a burning smell. • There may be a residue left on the motor from the manufacturing process, causing a
slight odor during initial use. This will go away. If a strong odor or any visible smoke
appears, unplug the unit IMMEDIATELY and call the Customer Service number.
Motor seems weak. • Are you using the recommended speed for the item you are processing?
• Are you using the recommended food size and quantity to be processed? Refer to the
food processing charts for recommended food sizes and speeds.