Black+Decker BDCJS12U, Manual

Page: 5 / 28

5
ENGLISH
Warning! Contact with, or inhalation of dusts arising from
cutting applications may endanger the health of the operator
and possible bystanders. Wear a dust mask specifically
designed for protection against dust and fumes and ensure
that persons within or entering the work area are also
protected.
‹ ‹
The intended use is described in this instruction manual.
‹ ‹
The use of any accessory or attachment or performance
of any operation with this tool other than those
recommended in this instruction manual may present a
risk of personal injury and/or damage to property.
Safety of others
‹ ‹
Never allow children, persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge or people unfamiliar with these instructions to
use the machine, local regulations may restrict the age of
the operator.
‹ ‹
Never operate the machine while people, especially
children, or pets are nearby.
Residual risks
Additional residual risks may arise when using the tool which
may not be included in the enclosed safety warnings. These
risks can arise from misuse, prolonged use etc.
Even with the application of the relevant safety regulations
and the implementation of safety devices, certain residual
risks can not be avoided. These include:
‹ ‹
Injuries caused by touching any rotating/moving parts.
‹ ‹
Injuries caused when changing any parts, blades or
accessories.
‹ ‹
Injuries caused by prolonged use of a tool. When using
any tool for prolonged periods ensure you take regular
breaks.
‹ ‹
Impairment of hearing.
‹ ‹
Health hazards caused by breathing dust developed when
using your tool (example:- working with wood, especially
oak, beech and MDF.)
Labels on tool
The following symbols, along with the date code, are shown
on the tool:
:
Warning! To reduce the risk of injury, the user
must read the instruction manual.
Additional safety instructions for batteries
Batteries
‹ ‹
Never attempt to open for any reason.
‹ ‹
Do not expose the battery to water.
‹ ‹
Do not store in locations where the temperature may
exceed 40 °C.
‹ ‹
Charge only at ambient temperatures between 10 °C and
40 °C.
‹ ‹
Charge only using the charger provided with the tool.
‹ ‹
When disposing of batteries, follow the instructions given
in the section "Protecting the environment".
p
Do not attempt to charge damaged batteries.
$
The tool is intend of indoor use only.
‹ ‹
If the supply cord is damaged, it must be replaced by the
manufacturer or an authorised BLACK+DECKER Service
Centre in order to avoid a hazard.
Features
This tool includes some or all of the following features.
1. Variable speed trigger switch
2. Lock-off button
3. Saw blade locking lever
4. Blade clamp
5. Blade support roller
6. Shoe plate
7. Saw blade
8. Battery
Assembly
Warning! Before assembly, remove the battery from the tool
and make sure that the saw blade has stopped. Used saw
blades may be hot.
Charging the battery (fig. A)
The battery needs to be charged before first use and
whenever it fails to produce sufficient power on jobs that were
easily done before. The battery may become warm while
charging; this is normal and does not indicate a problem.
Warning! Do not charge the battery at ambient tem- peratures
below 10 °C or above 40 °C. Recommended charging
temperature: approx. 24 °C.
Note: The charger will not charge a battery if the cell
temperature is below approximately 10 °C or above 40 °C.
The battery should be left in the charger and the charger
will begin to charge automatically when the cell temperature
warms up or cools down.
‹ ‹
To charge the battery (8), insert the USB charger (9) (Not
supplied).
‹ ‹
Connect the USB charger to a power source.
The charging indicator will blink. The charge is complete
when the charging indicator switches to continuously on.