29
CHAPTER 4: Configuration
4. Configuration
To configure your ServSwitch Wizard system, you’ll
need to configure first the attached PCs, as directed
in
Section 4.1
, then the Switch itself, as directed in the
rest of this chapter.
IMPORTANT NOTE
Throughout the rest of this manual, the [Enter] designation
refers to the main “enter” or “carriage-return” key (often
labeled “
↵
”) on the main section of the keyboard. Do not
use the “Enter” key on the numeric keypad or the extra
“Enter” key found on the main section of some specialized
keyboards.
4.1 Configuring your PCs
Configure your PCs in the same way that you would if
your keyboard, mouse and monitor were all connected
directly to your PCs, but keep these things in mind:
• The ServSwitch Wizard emulates Microsoft
compatible serial, IntelliMouse, and PS/2 mice,
so make sure that your PC software is configured
for a Microsoft mouse of the correct type. Refer
to the list of supported drivers in
Section 3.1
.
