57
CHAPTER 4: Operation
4.4.2 T
HE
C
ONFIGURATION
M
ENU
Hitting the MENU key causes you to enter the configuration mode.
4.4.2.A Scan Mode
The first item on the configuration menu to be displayed is scan mode.
The bottom line is common to all menu items. Using the up- and down-
arrows on the keypad will scroll through the possible items that can be
accessed. Using the ENTER key will allow you to modify the item.
If you hit ENTER at scan mode, you will see the following display:
You can use the up- and down-arrows to scroll between off and on. Hit
ENTER to select your choice. If you turn scan mode on, it will not start until
you leave the configuration menu.
4.4.2.B Scan Time
The next item on the menu is the scan time. It looks like this:
Hitting ENTER will bring up the following display, where you may enter a
new value between 1 and 999.
Scan time> 5
New value(1-999)
■
Scan time> 5
Enter•select
↑↓
•item
Scan mode> Off
Choose
↑↓
Off
Scan mode> Off
Enter•select
↑↓
•item
Summary of Contents for ServManager SW995A-R2
Page 84: ...NOTES...
Page 85: ...NOTES...
