Black Box ServManager SW995A-R2, Manual

Page: 20 / 86

21
CHAPTER 3: Installation
2.
Press the MENU key to access the configuration menu. A configuration
option will appear; the order in which options appear will depend on the
revision level of the unit’s firmware. Press the up-arrow to cycle through
the available options. When you reach the Max Ports option, enter the
maximum number of ports in your system if it will differ from the
displayed default.
3. Press the up-arrow until you get to the Keyboard option. Press the
ENTER key to access the available settings for the Keyboard option. Use
the up-arrow to scroll through the choices of PC, Mac (Apple), or Sun.
Use the ENTER key to select the proper setting once you’ve scrolled to
it. The selected setting should now appear on the top line.
3. If you are using a PC keyboard but are not using a PS/2 mouse, press the
up-arrow again. The Mouse option should appear (at the time of this
writing, “PS/2” is the default). Press the ENTER key to access the
available settings for the Mouse option. Use the up-arrow to scroll
through the available choices (see
Section 4.4.2.E ). Use the ENTER key
to select the proper setting once you’ve scrolled to it. The selected
setting should now appear on the top line.
4. If not all of your CPUs are IBM PC type, press the up-arrow again. The
CPU Keyboard/Mouse option should appear. Press the ENTER key to
access the available settings for the this option. Use the arrow keys to
scroll through the available choices for each CPU (see
Section 4.4.2.F ). Use the ENTER key to select the proper setting once
you’ve scrolled to it. The selected setting should now appear on the top
line. To exit this option, press the MENU key.
5. If you are cascading, press the up-arrow until you get to Width, then
Units, setting each in turn. See Sections 4.4.2.I and 4.4.2.J .
6. Use the menu key to exit the menu. You are prompted to save the
configuration menu. Press the ENTER key to save the new keyboard
setting. Power the unit OFF.