14
4 X 2 SCSI MATRIX SWITCH
NOTE
1. Connections can be made to either connector on the appropriate port.
2. “Term” indicates where terminators should be installed.
The LCD panel is used to select port connections and enable or disable each
internal SCSI port terminator. Refer to
Chapter 4
for complete instructions on
operating the LCD keypad.
You can selectively enable or disable any internal terminator to meet system
configurations and requirements.
NOTE
For proper operation of any SCSI bus, there must not be a “hanging”
line or cable. Termination should be enabled on active SCSI ports that
are not connected through to another port.
Summary of Contents for SC122A
Page 3: ......
