15
CHAPTER 3: Installation
3. Installation
3.1 What’s Included
• This users’ manual
• (1) 4 x 2 SCSI Matrix Switch
• (1) AC power cable (110 or 220 V)
• (1) 10-ft. (3.1-m) 9-Pin-male-to-9-pin-female RS-232 cable
• (1) 9-pin-male-to-25-pin-female RS-232 adapter
• (2) SCSI Matrix Switch control software disks
• Rackmount handles and screws
• Bottom feet
If anything is missing or damaged, call Black Box at 724-746-5500.
3.2 AC Line Voltage
You can connect the Switch to any AC input voltage between 105 to 240 volts.
Unless otherwise specified, the Switch will be shipped with a 110-volt power cord
for use in the USA. For a power cord that will work in your country (outside the
USA), call Black Box Technical Support.
3.3 Switch Placement
Place the Switch in a convenient location near the host computer or peripherals.
Keep SCSI cable lengths short to provide the best performance and reliability.
Make sure that the dual fans and ventilation slots on the sides of the Switch receive
adequate airflow. Do not place the Switch on any devices that generate excessive
heat.
3.4 Power Equipment Off
Power off all equipment and peripherals connected to the SCSI interface before
installing cables or terminators.
Summary of Contents for SC122A
Page 3: ......
