Page 19
724-746-5500 | blackbox.com
Chapter 4: Installation
4.6 Connecting the Standalone Radio or Radios
At the other end of the link, you will install the second (standalone) radio that’s
included with your kit. Refer to Figure 4-10 and follow the steps below.
RF-TNC
connector
Power and data
CAT5e cable,
outdoor grade,
300 ft. (50 m)
maximum
Power over
Ethernet
injector
10BASE-T
data cable
Ethernet
RJ-45
connector
110-VAC
power plug
Wireless radio
Antenna
Figure 4-10. Installing the standalone radio (Included) at the other end.
of the wireless Ethernet link.
1. Using CAT5e cable, connect the power injector (included) to the radio.
2. Using an RJ-45 CAT5e cable, attach the other end of the power injector to the
Ethernet network. Then connect the power plug to the included universal
power supply (90–264 VAC).
3. Following the instructions in Section 5.2, mount the radio to a pole or the side
of a building.
