Page 21
724-746-5500 | blackbox.com
Chapter 5: Configuring the Radio
The LS900A should appear in the list as the default address of 192.168.1.17.
If it does not, click “Search” to regenerate the list. If it still does not appear,
either you might have a connection issue and need to re-examine the cabling,
or you might have a firewall issue on your computer.
4. Double-click the item in the list that refers to the radio being configured. You
will see a second window similar to Figure 5-2.
Figure 5-2. Radio IP Configuration screen.
The information on the left in Figure 5-2 is the current status of the radio; the
boxes on the right allow you to change it. Make sure that the radio’s IP address
is in the same subnet as your computer. For example, if the subnet mask is
255.255.255.0 (a class C network), the first three number groups of the IP
address must match. Choose your desired parameters and click “Apply.”
5. Write down the IP address and password you just chose, then click “Go to
Device Web Page.” Your default Web browser will launch with the device IP
address in the browser address bar. Or, you may launch the browser on your
own and enter the Web page address manually: http://[the IP address you just
set].
