Page 22
724-746-5500 | blackbox.com
LongSpan 900-MHz Wireless Ethernet Tube Housing Kit
6. The browser page that loads first shows the current device information and QoS
statistics and provides a login at the upper right. Log in using the password you
just specified (or “password” if you kept the default). If the login is successful,
you will see the Admin page similar to Figure 5-3.
Figure 5-3. Admin page.
7. This page has sections similar to the login page showing radio statistics and
device information plus it adds several new sections. The Device Settings section
allows you to set the network information and choose an RF frequency channel.
The default is to allow the radio to choose its own frequency based on
minimizing interference. If you set a fixed channel, make sure the AP and all SUs
use the same one. References to DIP switches on this and the next Web page
refer to switches inside the radio that are used in the legacy method of
configuration. You may ignore the DIP switches when using the Web browser
method.
