Black Box LR120A, Getting Started Manual

Page: 98 / 128

Detailed Description 93
WAN Access Routers Getting Started Guide 10 • System Configuration
All Black Box routers have the ‘PP over Threshold’ and ‘NP over Threshold’ alarms. The LR120A has addi-
tional alarms for the T1/E1 WAN port. An alarm can be tested by clicking on the Generate button. Similarly,
by clicking on the Clear button, the alarm is cleared, that is, turned off, however the Time and Count parame-
ters remain. Only by clicking on the Reset button can you clear the alarm and reset the Time and Count
parameters. The parameter definitions are:
• Alarm Severity: there are five categories of severity-Critical, Major, Minor, Informational, and Ignore.
• Time: the time that the last alarm occurred.
• Count: the number of instances the alarm has occurred.
To configure the severity of each alarm and to configure the Alarm Error Log, click on Modify Alarms... to
reach the webpage. (See
figure 73 .)
Figure 73. Alarm & Alarm Error Log configuration
The Alarm Error Log can be enabled or disabled. The severity level of the Alarm Log can also be configured.
Similarly each alarm can be set for its own severity level.