Black Box LR120A Getting Started Manual Download Page 112

Page: 112 / 128

General Characteristics

107

WAN Access Routers Getting Started Guide

A • Specifications

General Characteristics

•

Compact low-cost router/bridge

•

10/100 Ethernet

•

Comprehensive hardware diagnostics. Easy maintenance and effortless installation.

•

Built-in web configuration.

•

Setup allows for standard IP address and unique method for entering an IP address and mask WITHOUT
use of a console connection. Default IP address of 192.168.200.10/24.

•

Simple software upgrade using FTP.

•

Front panel LEDs indicate Power, WAN, Ethernet LAN speed and status.

•

Standard 1 year warranty, parts and labor.

Ethernet

•

Auto-sensing Full-Duplex 10Base-T/100Base-TX Ethernet.

•

Standard RJ-45 and built-in MDI-X cross-over switch.

•

IEEE 8021.d transparent learning bridge.

•

8 IP address/subnets on Ethernet interface.

Sync Serial Interface

•

ITU-T X.21 or V.35 interface

•

Available with female DB-25 and DB-15 connectors

•

User configurable DTE/DCE for X.21

T1/E1 Interface

•

Line Rate 1.544 Mbps (T1), and 2.048 Mbps (E1)

•

RJ-48C connector (also includes dual BNC for E1 connections)

•

DSX-1 levels for connection to local T1/E1 device (PBX).

•

Nx56/64 kbps with full DS0 mapping

•

AMI/B8ZS (T1), AMI/HDB3 (E1)

•

ESF coding and framing (T1)

Protocol Support

•

Complete internetworking with IP (RFC 741), TCP (RFC 793), UDP (RFC 768), ICMP (RFC 950),
ARP (RFC 826).

•

IP Router with RIP (RFC 1058), RIPv2 (RFC 2453).

•

Static routes.

Summary of Contents for LR120A
































































































































Search results

Summary of Contents for LR120A

Reviews:

Related manuals for LR120A

Brands by name

Popular brands

Black Box LR120A, Getting Started Manual

Search results

Summary of Contents for LR120A

Reviews:

Related manuals for LR120A

Brands by name

Popular brands