Detailed Description
97
WAN Access Routers Getting Started Guide
10 • System Configuration
Error Log
The Error Log webpage shows recent configuration errors and provides for the configuration of the Syslog. (See
figure 80
.) Two parameters are configurable for the Syslog.
•
Syslog Host: enter the IP address of the Syslog (Default = 0.0.0.0)
•
Syslog Facility: select the type of syslog facility (Default = disabled)
Click on the
Update
button to activate the selected parameters. Default value is a disabled Syslog.
Figure 80. Error Log and Syslog Settings
SNMP Daemon
For remote management from an SNMP capable management station, the Black Box’s SNMP Daemon must
be configured. To identify a specific Black Box, configure the Static Variables which the system administrator
may use for link identification.
The Community Table has three configurable parameters.
•
Password: this is the password which the remote management station must use to access the Black Box for
reading/writing the SNMP variables.
•
Management IP: the IP address of the management station.
•
Access: select either Write or Read. The management station can be authorized to configure the Black Box
by ‘writing’ to the SNMP variables or limited to a ‘read’-only function.
Summary of Contents for LR120A
Page 1: ...LR120A LR121A LR122A LR125A WAN Access Routers Getting Started Guide...
Page 24: ...19 Chapter 2 Product Overview Chapter contents Introduction 20 Applications overview 21...
Page 115: ...110 Appendix B Cable recommendations Chapter contents Ethernet Cable 111 Adapter 111...
Page 128: ......
