Black Box LR120A, Getting Started Manual

Page: 53 / 128

PPP Routed 48
WAN Access Routers Getting Started Guide 6 • WAN Services
Verify the settings to be:
• Interface = 1
• LLC header mode = dialout
• LLC header mode = off
• HDLC header mode = on
• No authentication
• Leave User name and Password blank.
Click on
Create
.
PPP Routed
This application shows configuration for two Black Box units in PPP routed mode. An Black Box may be used
as the router at the Central site, but it is not necessary. You can use a third party router as long as it supports
PPP routed operation. If using a third party router at the Central site, review the router’s configuration. (See
figure 30 .)
Remote site configuration
First configure the IP address on the Ethernet port (interface ip1) for 192.168.200.2/24 via the command line
(CLI). The PC will be on the same subnet as the Black Box Ethernet port. Once this is done, you can complete
the configuration using the web pages.
Figure 30. PPP Routed Application
1. Bring up the web-page management system on your browser by entering the IP address of the Black Box.
2. On the Menu, go to Services Configuration, then to WAN. Delete the factory default WAN services
already defined.
3. Click on Create a new service in the main window, select “PPP routed” and click on the
Continue
button.
In the Description field, enter the description you wish. In this example, it is called PPP Routed.
– Description: PPP Routed
– Interface: 1